Contact

Please contact us to discuss your requirements.

Map and directions: click here

Telephone: 01460 221745
Fax:
Email: please use form below

Address:
K.D. Design & Fabrication,
Yonder Hill,
Chard Junction,
CHARD,
Somerset
TA20 4QR

Contact Form

651

Map and Location

Zoom out to see our location in context


View Larger Map

Directions

From the North (Somerset, Avon, Gloucestershire)

  • Take the M5 to Taunton (J25).
  • Take the A358 south to Chard, taking particular care to take the correct exit at the large roundabout at the junction with the A303 near Ilminster.
  • In Chard, take the A358 south about 2 miles to Tatworth where you must turn left (filter lane).
  • Follow the road down the hill.
  • At the end of the road turn left then immediately right signposted Chard Junction.
  • Follow the road over the level crossing.
  • At the top of the slope there are industrial buildings to the right - carry on until you see our sign on the front of our building.

From the East (South Somerset, Wiltshire, Hampshire)

  • Take the A303 then A356 or A30 or A356 (after A35, A37) west to Crewkerne.
  • From Crewkerne take the A30 west towards Chard.
  • At Cricket St. Thomas take the B3167 signposted to Axminster.
  • Follow the B3167 down to South Chard where you must turn left signposted Chard Junction.
  • Follow the road over the level crossing.
  • At the top of the slope there are industrial buildings to the right - carry on until you see our sign on the front of our building.

From the West (Devon, Cornwall)

  • Take the A30 east. Note that the A30 becomes(!) the A303 after Honiton, so turn off right to follow the A30.
  • In Chard, take the A358 south about 2 miles to Tatworth where you must turn left (filter lane).
  • Follow the road down the hill.
  • At the end of the road turn left then immediately right signposted Chard Junction.
  • Follow the road over the level crossing.
  • At the top of the slope there are industrial buildings to the right - carry on until you see our sign on the front of our building.

From the South (South East Devon, West Dorset)

  • Make your way to Axminster, using the A35 or A3052 and A358.
  • Take the A358 north toward Chard.
  • After Tytherleigh turn right onto the B3167 and follow this down passing through South Chard.
  • Immediately after the bottom, turn right signposted Chard Junction.
  • Follow the road over the level crossing.
  • At the top of the slope there are industrial buildings to the right - carry on until you see our sign on the front of our building.
Listed in the YFS business directory in the Steel Fabrication Chard category